| 
	   
		Home :: 31-Ignition Batteries, Points, Condensers, Coils, Solenoids, Switches, Relays, Regulators, Fuses, Battery Cables&terminals, Wire, Battery Hold Downs	   
	   :: MTD Pro
	   | 
    
   
      |   | 
    
   
      
		   
            
               
                  
                     
					 Starter Solenoid Volt=12  Studs=1/4" X 20 Grounded Through Base					  | 
                   
                  
                     | 
						 Replaces the following part numbers 
				      MTD Pro 725-0530 925-0530 725-0771                             
                           *NOTE this solenoid is made by Phelon will work on most any 12 volt system that uses 1 terminal to energize, it gets its ground through the mounting base. 
 
Also note that the battery terminals are 1/4" studs. 
Yours maybe 5/16 but you can still use this by adding 1/4 washers. 
 
We got over 1000 of these from lost freight that is why the low price. So stock up while you can.                            
												
						 | 
                                               | 
                       | 
                                       
                   
                     | 
							 | 
                       | 
                       | 
                   
                  
                     | 
							Catalog Number MFG-KT-SOL							 | 
                      | 
                       | 
                   
                 | 
             
          
	    | 
    
 
		
		
  |